Soluted excessive exhaust yourself
When the engine at work is the fastest growing dirty carburetor and air filter, because the roads to the dust content of air of small suspended particles large. If you encounter bad weather or dusty sand road even more serious. Air filter can only filter out the larger impurities in the air, while the impurities will be a large number of particles through the air filter, through the carburetor into the cylinder. Because there is a glial component in gasoline (petrol made relatively large glial content), repeated the work of the engine when the oil will be deposited in the carburetor Road airway surface. Most important is the amount of air holes each carburetor. Because of its small aperture, required precision, when the air of dust, impurities by adsorption colloid when gasoline will soon be deposited next to the volume of air hole diameter becomes smaller, resulting in reduced supply, fuel supply relative increase, so that incomplete combustion of combustible mixture, which is the engine idling and high idle speed causes excessive exhaust emissions.
To solve the problem yourself is often simple and effective:
The first step to buy a can of carburetor cleaner to remove the air filter to. As the cleaning agent that can dissolve the solidified surface of the carburetor on the part of glial, with timely and easier to wash away. The current market, there are two carburetor cleaner, cheaper domestic prices, but the cleaning efficiency is low; import prices high, but the cleaning efficiency.
The second step will be to launch the engine to normal operating temperature.
The third step, hand throttle to the engine at idle and medium speed operation while under the alternative, with carburetor cleaner were facing the small nozzle carburetor idle air volume holes and the main fuel supply unit volume of air holes ( both eyes can see) Continuous spray 1-2 times 1-2 seconds, and then against the size of carburetor spray pipes a week, you can achieve the purpose of cleaning the carburetor.
The fourth step is to clean the air filter paper, filter out, to knock the dust on its surface destroyed or blown with compressed air can.
Different situations should note the following:
(1) of the carburetor and air filter cleaning work to be done according to motor cars and mileage, road conditions and determined the quality of gasoline. Proposed travel 1,000 km or every two weeks cleaning time. This will maximize the time carburetor automobile exhaust compliance.
(2) operation of the process should pay attention to safety, to prevent impurities and foreign matter fall into the carburetor. After a thorough car repair factory exhaust after treatment, can persist in the use of the carburetor and air filter regularly clean, you can reach into small (a can of carburetor cleaner can be used four times or so), and to ensure that vehicles Carburetor dirty will not result in emissions exceed.
Leave a Reply